Sider

Wednesday, January 15, 2014

Embossing tecniques



Hi again!
This blog post is very long, so find yourself a cup of tea or coffe and
 enjoy this articel about embossing.
Embossing and debossing are the processes of creating either raised or recessed relief images and designs in paper and other materials. An embossed pattern is raised against the background, while a debossed pattern is sunken into the surface of the material.

Dry embossing.

               Regular dry emossing with embossing folder from Tim Holtz               



Dry embossing with folder and ink



I have added a video to show you how.




Dry embossing With folder on Tim Holtz embossing paper.





Dry embossing with folder on Tim Holtz embossing paper, and sanded.


 How to make your on embossing plates


Heat Embossing

You can use any stamp, although it’s easier to get a clean embossed image
 using a stamp with bold, clear lines.
What you’ll need: Paper, stamp, embossing powder, ink pad and heat gun.
stamping project


stamping project


stamping project
Embossing powder comes in all colors and types.
Versamark ink pad
Heat gun


Paper

You can emboss on pretty much any kind of paper: Cardstock, patterned paper, glossy paper or specialty paper. The heavier the paper weight, the less likely the paper will curl up when heated. Vellum can be embossed; as with lighter papers, you’ll want to place it between some books to flatten it out after embossing.


A juicy ink pad

You need the embossing powder to stick to the inked image before heating it,
 so you’ll want an ink pad that dries slowly.
 If you stamp with a colored ink, your embossed image will still be the color of your embossing powder—not the color of the ink you used. Using different color inks can enhance the color of an embossed.
 Instruction
  1. Ink the stamp with your embossing ink pad and stamp on your paper.
  2. Immediately pour embossing powder on the image. Make sure you cover the entire image.
  3. Shake the excess powder onto a piece of scrap paper. I usually tap the edge of the paper against the table to make sure I’ve removed any stray powder. A small dry paintbrush or cotton swab is perfect for removing stray powder too.
  4. Gently roll the scrap paper into a funnel and pour the embossing powder back into the bottle.
  5. Place the paper on your heat-resistant surface or hold it with tweezers so you don’t burn your fingers. I like to warm up my embossing gun for a minute before using it.
  6. Hold the embossing gun about 6” away from the image. Sweep the gun over the image, taking care not to direct it in one area for too long. You’ll see the change—as the embossing powder melts, it will become smooth and dimensional. Be careful not to overheat, otherwise the powder will bubble and the paper could burn.
  7. That’s it! You’re done. Now that you’ve mastered the basics, you can experiment with different papers, effects and techniques.








Jeg har kost meg med herlige saker fra Korthobby.no, maling, cameo, sommerfugl,  ramme og hjørner er alle fra dem..


I have had so much fun with stuff from Korthobby.no, Paint, cameo, butterfly, frame and corners are all from them

Korthobby har nå disse herlige tynne metallbitene som du kan bruke i embossingdiesene fra Sizzix. I nettbutikken finner du både dies og metall i ulike fasonger.. Denne jeg har brukt heter Lily Damask
Korthobby now has this wonderful thin metal pieces that you can use with embossingdie from Sizzix. In the shop you can also find many other shapes and die in the store. The one I have used is called Lily Damask.



Etter at jeg har embosset har jeg malt det meste med MetaMica maling som du også finner hos Korthobby.no


After embossing I have painted it all with MetaMica Paint that you also will find with Korthobby.no







Jeg har laget et vinterkort. Dette er et ganske enkelt kort. Papirer er fra Panduro. Bånd er et gammelt bånd fra Martha Stewart fra Hobbykunst. Rosene er Mathia roses, også fra Hobbykunst. Diecuten "Winter Wishes" er en gratis kuttefil fra Bird Cards. Diecut bladene er en silhouette fil.

I have made a winter card. This is quite an easy card. Papers are from Panduro. The Ribbon is an old Ribbon from Martha Stewart, from Hobbykunst. The roses are Mathia roses, also from Hobbykunst. The diecut "Winter Wishes" is a free cutting file from Bird Cards. Te diecut leaves is a Silhouette file.


Jeg har brukt tørrembossing for å lage litt ekstra effekt på kraft papir. Jeg brukte Sizzix - Tim Holtz Alterations - Diamond Plate Embossing Folder. Etterpå distresset jeg det hevete mønsteret for å lage litt ekstra effekt i det hevete mønsteret. 

I have used dry embossing to create the effect in the Kraft paper. I used a - Sizzix - Tim Holtz Alterations - Diamond Plate Embossing Folder. I also distressed the raised pattern with distress ink, to create an extra effect in the pattern.


Det å lage kort og andre prosjekter er ofte ganske dyrt, fordi man har bruk for endel verktøy. I begynnelsen er det vanskelig å invistere i alt på en gang. I flere år embosset jeg ved å bruke kjevle. Dette fungerer fint når du skal embosse lite. Jeg har lagt ved en video for å vise deg hvordan du kan embosse med en kjevle.

Crafting and cardmaking is often quite expensive, because a lot of tools are required. In the beginning it is difficult to invest in everything. For years I embossed with embossing folders and a rolling pin. This works fine for small embossing jobs. I have added a video to show you how.




Jag har embossat detaljer som jag stansat med Utee guld. Ett lite tjockare embossingpulever. Innuti ramen har jag embossat med en embissoing folder och hjärtat i ramen är även det embossat med en embossing folder.Brevid hjärtat har jag ett hjärta som jag emossade med utee med, men före jag vrmde pulvret skakade jag av det mesta så det bara delvis blev täckt av pulver.

I have embossed details with utee gold a thicker embossing powdwe. Inside the frame i have dry embossed the background with a embossing folder, the same with the heart.
The flower beside the heart I shaked of most of the emossing powder befor I heated it there for there is only litle aerias that was embossed.







 Jeg har brukt Tim Holtz sine små embossingfoldere for å lage noen små "kort" som man kan bruke seinere som pynt på prosjekt.
Jeg er veldig glad i den med gears og bilen.
 Tok et Prosjekt Life kort 4x 6 inch og delte i to. Runda hjørnene med envelopemaker fra We are memory keepers ( den er genial å bruke til det)

I used some of the small TH embossingfolders to make some small card to use as embellishments on later projects
I took a 4x6 project life card and made two small ones. I just used the Envelopemaker from W are memory keeper to round the corners. 
 

Tok deretter og tørrembosset motivene og hadde blekk over det embossa området for å fremheve det. Deretter hadde jeg på clear embossing pulver og brukte varmepistolen.

I just embosset the papers in the folders and used some ink to higlight the image. Took some clear embossingpowder over to make it stand more out. 

Så tok jeg og blendet Distressblekk Pumpic Stone på bakgrunnen
Deretter distresset jeg kantene med embossingblekk og hadde på 2farget embossingpulver fra Lindys Gangstamp.
Det er litt vanskelig å få frem fargene skikkelig på bildene pga av glans fra lyset.

I took some Distress ink- pumpic stone and blended it on the background.
Then I distressed the egdes with embossing ink and used a 2toned embossing powder from Lindys Stampgang to make a frame on the cards.






Så her er to kort klar til bruk på fremtidige prosjekt.

So here it is, two cards ready for use in a project whenever I feel for it.


Thats all for today, I hope you enjoyed the blog post.

Have a nice and creative day.


Line


Her har jeg laget et bursdagskort,
og på et av panelene har jeg brukt en embossingfolder 
for å skape litt mere liv i kortet.
gikk over med brun stempelpute for å fremheve embossingen litt..
~
Here I made ​​a birthdaycard, 
and on one of the panels I have used a embossingfolder 
to create a little more life in the card. 
went over with brown ink pad to highlight the embossing a bit ..


3 comments:

  1. Thanks for sharing the tips and techniques.

    ReplyDelete
  2. It's easy. In just seven steps you made this..Amazing. I really like this videos to know more about embossing technique. We offer custom metal stamps. Contact us to get details.

    ReplyDelete